Products

Products

LED Fan Lamp Series-TALBDFA2

Features
Super Bright, Folding Leaves
Easier To Install
Volt 85-265V
Power 80W
Base (E27)
Material
Lamp cap: ABS material
Lamp leaf: Die cast aluminum

LED Flood Light Series – TALFS26

TALFS26 has two types of products:
one is Linear Voltage type
the other is DOB Wide Voltage type
This series has high cost performance ratio and its advantage is large luminous surfaceFeatures.
Features
Color: Grey&Black
Anti-surge of 10W/20W/30W: 1.5KV
Anti-surge of 50W/100W/150W/200W/300W:3.5KV
IP66 Waterproof
2835 led chips
Lumen of linear Voltage type : 75-85lm/W
Lumen of DOB Wide Voltage type : 95-105lm/W
Environment  Temperature  -30°~ 50°
Material
Aluminum die casting body

LED Emergency Bulbs TALEB5 Series

Features
1 battery 1200 mAh, 2 batteries 2400 mAh, 3 batteries 3600 mAh, it is more convenient to replace the battery, and it can be charged and discharged in cycles
The rechargeable emergency bulb automatically turns on when the power fails.
Keep The rechargeable emergency bulb always charged when you use them as  regular light bulbs all year long – Saving 80% energy and last 50times longer than regular incandescent bulbs.
Material
Plastic

LED Separable UFO Series- TALHB11

Features
Could be assembled in 1 second.
It could save 50% of the volume.
High thermal conductivity for material of lamp shell.
The led chip is completely separated from driver.
Life span is up to 10000 hours.
Material
Plastic

LED GX53 Cabinet Light Series – TALDSS20

Features
Uniform light distribution.
High light,high CRI,high transparency.
SMD chip.
Material
PC Cover, Die-casting Alum body

LED UFO Series-TALBH10

Features
IC driver more stable
High-light led chips
Long lifespan, low maintenance cost
Material
Plastic + Aluminum Body

Solar LED Flood Light Series- TALFS22

Features
Model: Light & Time & Remote Control
Water-proof Level:IP 65
Power up to 400W
Large Solar Panel Fast Charging
With remote control

LED High Bay Light Series-TALBH8

Features
IC driver more stable
High-light led chips 100lm/w
Long lifespan, low maintenance cost
Separate packaging, space saving
Material
Plastic + Alum Body

LED Downlight Series-TALDSS12

Features
Easy to install. Ceiling recessed mounted. Supporting AC110-130V, AC220-240V
High lumen output, high luminous efficacy LED Chips as light source
Long lifespan, low maintenance cost
Good light distribution makes light more soft and uniform
Linear IC Driver
Material
PVC+Iron

LED Bulbs Series-TALJ1

Features
Saves over 90% on electricity bill of lighting
Super long service lifespan up to 50,000 hours
Eco-friendly that contains no toxic, no mercury, no UV or infrared
Material
AL+PC

LED Bulbs Series-TALBR4

Features
Can be controlled via smart phone or tablet by connecting the Bluetooth, then you could use it play your favorite music and relax yourself
RGB LED light source can make visual effect more prominent and light softer as you like to protect your eyes
Excellent quality, fashionable design, environmental protection, low power consumption and long service life
Easy to install with E27 lamp base and suit for most bulbs using. You can use it as a led light bulb and install it to your floor lamp or desk lamp. Make it to be a night light with music playing
The smart music bulb with built-in speaker not only can be used as a led light bulbs, but also can be a speaker, led night light and led party light,which can be controlled through your smart phone by bluetooth wireless
Material
Plastic

LED Bulbs Series-TALBR3

Features
Red, green and blue three colors change. The colorful lighting which is very bright and beautiful spot on the wall or floor
Energy saving, low power consumption,high efficiency
360° Revolving Motor
Easy installation, just plug and play
Material
Plastic

LED Bulbs Series-TALBR2

Features
This bulb will rotate on it's own as soon as it's switched on
Three colors of strobe effects: red, green and blue create the ultimate disco or party effect in a large sized room
Ideal for family gatherings Party, karaoke, dance halls , nightclubs , discos , bars, KTV bars , shopping malls , plazas , parks and other occasions
This amazing LED rotating party light will add color to any room or is great for any occasion
Material
Plastic

LED Fan Lamp Series- TABDF2

Features
The illuminating blades can be adjusted according to the needs （0°~90°）to obtain different angle light sources.
The light is stable, soft and not glaring, long life and stable quality.
Good resistance to corrosion and insulation, safer to use electricity
2835 SMD chip
Material
Plastic

LED T-Bulbs TALST5 Series

Features
High Transmission Cover 270°View Angle.
85LM/W High Lumen LED Chips.
IC Driver.
Material
PBT+Aluminum Cup,PC cover

[contact-form-7 id="268" title="Contact Us"]